CANOGA PERKINS 9145E Standard NID Software Version 1.0 - Manual (Page 52)

9145E NID Software User’s Manual Diagnostics
VLAN Loopback
42
Figure 4-7 802.1ag Loopback Configuration
MD Level - This is the Maintenance Domain (MD) Level to match for responding to LBMs.
To change the Maintenance Domain (MD) Level, type 3 and press Enter. Use Backspace to remove
the current setting, then type in the new setting. Press Enter to confirm the setting.
Ether Type - This is the ethertype to match for responding to LBMs. 0000 indicates any ethertype
except IP ethertype (0x800). The default is 8902.
To change the Ether Type, type 4 and press Enter. Use Backspace to remove the current setting, then
type in the new setting. Press Enter to confirm the setting. Press Esc to return to the VLAN Loopback
menu.
4.4.1 VLAN Loopback Statistics
To view current VLAN loopback statistics, type 2 and press Enter. The VLAN Loopback Statistics (Current)
screen (Figure 4-8) opens. Press Ctrl+S to clear the current counters. Press Ctr+T to view the raw
counters.
Press ESC to return to the Loopback Configuration screen.
Canoga Perkins Corp. Ethernet Network Interface Device 22-APR-2009
Model 9145E-404-8-0 V01.00 F506 15:56:52
-------------------------802.1AG LOOPBACK CONFIGURATION------------------------
1) Administration State Enabled
2) VLAN ID (1-4094) 1-4094
3) MD Level (0-7) 0-7
4) Ether Type (4 Hex Digits) 8902
Select[1-4]:
------------------------------------Messages-----------------------------------