CANOGA PERKINS 9145E Standard NID Software Version 1.0 - Manual (Page 54)

9145E NID Software User’s Manual Diagnostics
VLAN Loopback
44
Figure 4-9 L2 Ping Generator Screen
Incremental Size: - Frame size of the LBM to be built, excluding 4 bytes CRC.
Frame Interval: - Time interval between two LBMs to be sent out. 0-500 in 10 ms intervals may be
specified. 0 indicates as fast as possible.
Frame Format: - Frame to be sent out in IEEE 802.3 or LLC SNAP format.
Start L2 Ping: - Start to send out the LBM and verify the responses. The status will be shown. You
may stop the testing by entering the ESC key.
After starting a Layer 2 Ping, the following statistics will appear on the bottom half of the screen:
First Transaction ID: - Transaction identifier for the first LBM sent out in this test.
LBM Transmitted: - Number of LBMs sent out in this test.
LBR Received: - Number of valid LBRs been received in this test.
LBR Out Of Sequence: - Number of LBRs been received in this test, which are out of sequence.
LBR Unexpected: - Number of unexpected LBRs received during this test.
Canoga Perkins Corp. Ethernet Network Interface Device 22-APR-2009
Model 9145E-404-8-0 V01.00 F506 15:58:31
-------------------------------L2 PING GENERATOR-------------------------------
1) Destination MAC Address 00-00-00-00-00-00
2) VLAN ID (1-4094) 1
3) VLAN Priority (0-7) 0
4) Ethertype (4 Hex digits) 8902
5) MD Level (0-7) 7
6) Egress Port Net
7) Frame Count (1-99999999) 1
8) Minimum Frame Size (60-2000) 60
9) Maximum Frame Size (60-2000) 1514
10) Incremental Size (0-256) 0
11) Frame Time Interval (0-500 10ms) 0
12) Frame Format IEEE 802.3
13) Start L2 Ping
Select[1-13]:
------------------------------------Messages-----------------------------------