CANOGA PERKINS 9145E Standard NID Software Version 1.0 - Manual (Page 36)

9145E NID Software User’s Manual System Configuration
Account Configuration
26
1. Username - The name of the new account you wish to add to the user list. Enter a name of up to
10 characters.
2. Account State - Specifies whether the account is active. Use Space to cycle between Enabled
and Disabled.
3. Access From - Determines from where the user can access this account. Use Space to cycle
between UI, SNMPv3, and UI/SNMPv3.
NOTE: SNMP only cannot FTP.
4. Access Level - Specifies the security level required to access this account. Use the Space Bar to
cycle between Observer, Operator, and Supervisor.
5. Description - Term used to describe the account type. Enter descriptive text up to 17 characters.
6. UI Password - A password is only required if Access From is set to UI or UI/SNMPv3. Type the
desired password and press Enter. Reenter the password. Passwords are limited to 15
characters.
7. UI Password Expires -Determines whether the password will expire and required to be changed.
Use the Space Bar to select Yes or No.
Password Expires in (days) - Establishes the number of days each password can be used
before a new password is required. Enter a number between 1 and 365. A setting of 0 will require
a new password each time the account is opened.
8. Allow UI Lockout Of User - Gives Supervisors the ability to lock users out of the system. Use the
Space Bar to select Yes or No.
9. Allow UI Logout Of User - Gives Supervisors the ability to log users off the system. Use the
Space Bar to select Yes or No.
10. UI Login Locked State - Determines the current state of the UI Login. Use the Space Bar to cycle
between Locked and Unlocked.
11. SNMPv3 Authentication Protocol - Sets the authentication protocol for SNMPv3 access. Use the
Space Bar to cycle between None, MD5, and SHA.
12. SNMPv3 Authentication Password - Used to enter the SNMPv3 authentication password. This
password is not stored. It is used to generate the SNMPv3 authentication key. Type the desired
password and press Enter. Reenter the password. The password is required to be between 8 and
15 characters. This field will be passed over if the SNMPv3 authentication protocol is set to None.
SNMPv3 Authentication Key - Displays the computed SNMPv3 authentication key. This is a field
that is shared with an SNMPv3 management application to allow authenticated protocol
exchanges.
13. SNMPv3 Privacy Protocol -The privacy protocol used for SNMPv3 access. Use the Space Bar to
cycle between None and DES.
14. SNMPv3 Privacy Password - Used to enter the SNMPv3 privacy password. This password is not
stored. It is used to generate the SNMPv3 privacy key. Type the desired password and press
Enter. Reenter the password. The password is required to be between 8 and 15 characters. This
field will be passed over if the SNMPv3 Privacy Protocol is set to None.
SNMPv3 Privacy Key - Displays the computed SNMPv3 privacy key. This is a field that must be
shared with an SNMPv3 management application to allow private SNMPv3 protocol exchanges.