CANOGA PERKINS CanogaOS Command Reference - Manual (Page 158)

CanogaOS Command Line Reference Revision 1.02
Proprietary & Confidential Canoga Pertkins Metro Ethernet Switches Page 158 of 855
Command Syntax
show spanning-tree mst
Command Mode
Privileged Exec modes
Default
Usage
Examples
The following is an output of this command displaying the mstp information. The down interface should
not be show.
Switch#show spanning-tree mst
Bridge up - Spanning Tree Enabled
Mode - Multiple spanning tree protocol
Path Cost Standard - dot1t
CIST Root Path Cost 0 - CIST Root Port 0 - CIST Bridge Priority 32768
Forward Delay 15 - Hello Time 2 - Max Age 20 - Max-hops 20
Tx Hold Count 3
CIST Root Id 8000e083bce89601
CIST Reg Root Id 8000e083bce89601
CIST Bridge Id 8000e083bce89601
Edgeport bpdu-filter disabled
Edgeport bpdu-guard disabled
Instance Interface VLAN
0 : 1
2 : eth-0-48 2
2 : eth-0-1 2
15: eth-0-48 15
15: eth-0-1 15
Related Commands
7.40 show spanning-tree mst config
Use this command to show the mstp region configuration information.