30 show route-map – CANOGA PERKINS CanogaOS Command Reference User Manual
Page 585
CanogaOS Command Line Reference
Revision 1.02
Proprietary & Confidential Canoga Pertkins Metro Ethernet Switches
Page 585 of 855
28.29.1.1 Command
Syntax
set weight WEIGHT
no set weight
28.29.1.2 Syntax
Description
WEIGHT
<0-4294967295> Specifies the weight value.
28.29.1.3 Command
Mode
Route-map mode
28.29.1.4 Defaults
No set weight is specified by default.
28.29.1.5 Examples
Switch# configure terminal
Switch(config)# route-map rmap1 permit 3
Switch(config-route-map)# set weight 60
28.29.1.6 Related
Commands
match as-path
28.30 show route-map
Use this command to display user readable route-map information.
28.30.1.1 Command
Syntax
show route-map [ NAME ]
28.30.1.2 Syntax
Description
NAME
route-map name
28.30.1.3 Command
Mode
Privileged EXEC