9 clear counters – CANOGA PERKINS CanogaOS Command Reference User Manual
Page 64
CanogaOS Command Line Reference
Proprietary & Confidential Canoga Pertkins Metro Ethernet Switches
Page 64 of 855
None
Examples
The following example set the bandwidth of the port.
Switch(config-if)# bandwidth 1000
The following example returns the bandwidth to default value.
Switch(config-if)# no bandwidth
Related Commands
duplex
speed
4.9 clear counters
Use this command to clear the counters on the interface
Command Syntax
clear counters [interface]
The clear counters command clears all current interface counters from the interface unless you
specify optional arguments that clear only a specific interface type from a specific interface number.
interface: the interface name
Command Mode
Privileged Exec mode
Usage
None
Examples
The following example clears the counters on all interfaces.
Switch# clear counters
The following example clears the counters on the interface eth-0-1.
Switch# clear counters eth-0-1
The following example clears the counters on the agg1.
Switch# clear counters agg1
Related Commands
None