24 ftp passive – CANOGA PERKINS CanogaOS Command Reference User Manual
Page 742
CanogaOS Command Line Reference
Revision 1.02
Proprietary & Confidential Canoga Pertkins Metro Ethernet Switches
Page 742 of 855
Command Syntax
ftp password passowrd
no ftp password
password
The password of the user name of the remote FTP server.
Default
No ftp password is defined.
Command Mode
Global configuration
Usage
The password will be encrypted in running-config if service password-encryption is enabled.
Examples
The following example creates the ftp password:
Switch(config)# ftp password abc
Related Commands
ftp username
ftp passive
39.24 ftp passive
To set the FTP mode in PASSIVE mode, use the ftp passive command in global configuration mode. To
restore the configuration to the default, use no form of this command.
Command Syntax
ftp passive
no ftp passive
Default
FTP works in Active mode.
Command Mode
Global configuration
Usage
Examples
The following example sets the ftp mode to passive: