CANOGA PERKINS CanogaOS Command Reference - Manual (Page 162)

CanogaOS Command Line Reference Revision 1.02
Proprietary & Confidential Canoga Pertkins Metro Ethernet Switches Page 162 of 855
Examples
The following is an output of this command displaying the mstp information of an instance.
Switch#show spanning-tree mst instance 2
MSTI Root Path Cost 0 - MSTI Root Port 0 - MSTI Bridge Priority 32768
MSTI Root Id 8002e083bce89601
MSTI Bridge Id 8002e083bce89601
eth-0-48: Port 48 - Id 8030 - Role Disabled - State Discarding
eth-0-48: Designated Internal Path Cost 0 - Designated Port Id 0
eth-0-48: Configured Internal Path Cost 20000
eth-0-48: Configured CST External Path cost 20000
eth-0-48: CST Priority 128 - MSTI Priority 128
eth-0-48: Designated Root 0000000000000000
eth-0-48: Designated Bridge 0000000000000000
eth-0-48: Message Age 0 - Max Age 0
eth-0-48: Hello Time 2 - Forward Delay 15
eth-0-48: Forward Timer 0 - Msg Age Timer 0 - Hello Timer 0
eth-0-1: Port 1 - Id 8001 - Role Disabled - State Discarding
eth-0-1: Designated Internal Path Cost 0 - Designated Port Id 0
eth-0-1: Configured Internal Path Cost 20000
eth-0-1: Configured CST External Path cost 20000
eth-0-1: CST Priority 128 - MSTI Priority 128
eth-0-1: Designated Root 0000e083bce89601
eth-0-1: Designated Bridge 0000e083bce89601
eth-0-1: Message Age 0 - Max Age 0
eth-0-1: Hello Time 2 - Forward Delay 15
eth-0-1: Forward Timer 0 - Msg Age Timer 0 - Hello Timer 0
Related Commands
7.43 show spanning-tree mst interface
Use this command to show the detail mstp information of a specific interface.
Command Syntax
show spanning-tree mst interface interface-id
interface-id The interface name you want to display
Command Mode
Privileged Exec modes