CANOGA PERKINS CanogaOS Command Reference - Manual (Page 86)

CanogaOS Command Line Reference
Proprietary & Confidential Canoga Pertkins Metro Ethernet Switches Page 86 of 855
5.4 lacp system-priority
Use this command to configure the system priority for the Link Aggregation Control Protocol (LACP). Use
the no form of this command to return to the default setting.
Command Syntax
lacp system-priority priority
priority: <1-65535>
Command Mode
Global configuration
Defaults
32768
Usage
None
Examples
This example shows how to configure the system priority 100 for the Link Aggregation
Control Protocol (LACP):
Switch (config)# lacp system-priority 100
This example shows how to return to the default setting:
Switch(config)# no lacp system-priority
Related Commands
None
5.5 show channel-group summary
Use this command to display a summary of all of the channel groups, or a specified channel group.
Command Syntax
show channel-group [channel-group-number] summary
channel-group-number: <1-255>
Command Mode
EXEC
Usage
None