CANOGA PERKINS CanogaOS Command Reference - Manual (Page 832)

CanogaOS Command Line Reference Revision 1.02
Proprietary & Confidential Canoga Pertkins Metro Ethernet Switches Page 832 of 855
snmp-server context context-name
no snmp-server context context-name
context-name Name of the SNMP context being created.
Default
No SNMP contexts are configured.
Command Mode
Global configuration
Usage
When you use the no snmp-server context command, all SNMP instances in that context are deleted.
Examples
The following is sample output from the snmp-server context command:
Switch(config)# snmp-server context contextA
Related Commands
44.4 snmp-server enable
To enable the SNMP function, use the snmp-server enable command in global configuration mode.
To disable the SNMP funtion, use the no form of this command.
Command Syntax
snmp-server enable
no snmp-server enable
Default
SNMP function is disabled.
Command Mode
Global configuration
Usage
Examples
The following is sample output from the snmp-server enable command:
Switch(config)# snmp-server enable
Related Commands