3 configuring layer 3 link aggregation interfaces – CANOGA PERKINS CanogaOS Configuration Guide User Manual

Page 102

Advertising
background image

CanogaOS Configuration Guide

Proprietary & Confidential Canoga Perkins Metro Ethernet Switches

Page 102 of 350

13.2.2 Validation Commands

DUT1#show ip interface brief

Interface IP-Address Status Protocol

eth-0-1 1.1.1.1 up up

vlan10 2.2.2.2 up up

DUT1#

DUT1#show ip interface

Interface eth-0-1

Interface current state: UP

Internet address(es):

1.1.1.1/24 broadcast 1.1.1.255

Joined group address(es):

224.0.0.1

The maximum transmit unit is 1500 bytes

ICMP error messages limited to one every 1000 milliseconds

ICMP redirects are always sent

ARP timeout 01:00:00, ARP retry interval 1s

VRRP master of : VRRP is not configured on this interface

Interface vlan10

Interface current state: UP

Internet address(es):

2.2.2.2/24 broadcast 2.2.2.255

Joined group address(es):

224.0.0.1

The maximum transmit unit is 1500 bytes

ICMP error messages limited to one every 1000 milliseconds

ICMP redirects are always sent

ARP timeout 01:00:00, ARP retry interval 1s

VRRP master of : VRRP is not configured on this interface

13.3 Configuring Layer 3 link aggregation interfaces

Layer 3 link aggregation interfaces are made up of routed ports. Link aggregation port interfaces
are described in “Configuring Link Aggregation”.

Advertising