CANOGA PERKINS CanogaOS Configuration Guide - Manual (Page 222)

CanogaOS Configuration Guide
Proprietary & Confidential Canoga Perkins Metro Ethernet Switches Page 222 of 350
Nexthop addr: 1.1.1.2, cross connect ix: 2, op code: Push
DUT #show mpls ftn-table
Primary FTN entry with FEC: 11.11.11.11/32, id: 1, row status: Active
Owner: CLI, Action-type: Redirect to LSP, Exp-bits: 0x0, Incoming DSCP: be
Tunnel id: 0, Protected LSP id: 0, Description: N/A
Matched bytes:0, pkts:0, TX bytes:0, Pushed pkts:0
Cross connect ix: 2, in label: 0, out-segment ix: 2
Owner: CLI, Persistent: No, Admin Status: Up, Oper Status: Up
Out-segment with ix: 2, owner: CLI, out intf: eth-0-20, out label: 400
Nexthop addr: 1.1.1.2, cross connect ix: 2, op code: Push
DUT #show mpls vrf-table
Output for VRF table with id: 1
Primary FTN entry with FEC: 9.9.9.0/24, id: 1, row status: Active
Owner: BGP, Action-type: Redirect to LSP, Exp-bits: 0x0, Incoming DSCP: none
Tunnel id: 0, Protected LSP id: 0, Description: N/A
Matched bytes:0, pkts:0, TX bytes:0, Pushed pkts:0
Cross connect ix: 5, in label: 0, out-segment ix: 5
Owner: BGP, Persistent: No, Admin Status: Up, Oper Status: Up
Out-segment with ix: 5, owner: BGP, out intf: eth-0-20, out label: 16
Nexthop addr: 11.11.11.11, cross connect ix: 5, op code: Push and Lookup
DUT #show mpls ilm-table
Codes: > - selected ILM, K - CLI ILM
Code In-Label Out-Label Out-Intf Nexthop FEC ILM-ID
> 16 3 eth-0-9 0.0.0.0 2.2.2.0/24 2
> 17 3 eth-0-9 2.2.2.3 8.8.8.0/24 3
K> 300 -1 N/A 0.0.0.0 0.0.0.0/0 1
（2）PE2 output