Leica Geosystems Leica mojo3D - User Manual - Manual (Page 125)

Leica mojo3D, Auto-Steer 125
5. Check that the steering kit is active. If the kit is not active, resolve
the issue, and then tap to continue.
The Steering Test screen appears.
6. Check that the manual steering of the vehicle is safe and satisfac-
tory. Tap the OK button.
7. Stop the vehicle and centre the wheels. Tap the OK button.
8. Tap the auto-steer engage button to engage the auto-steer.

Auto-steer can be turned off at any time, by tapping the on-
screen engage button or by manually moving the steering
wheel.
9. Tap the turn left button, and check that the steering wheel turns to
the left.
10. Tap the centre button, and check that the steering wheel turns to
the centred position. Note that not all steer kits offer this function-
ality.
11. Tap the turn right button, and check that the steering wheel turns
to the right.