Leica Geosystems Leica mojo3D - User Manual - Manual (Page 240)

240 Leica mojo3D, Virtual Wrench™ Remote Service
12.5 Restoring Previous Software Version
General informa-
tion If you perform a software upgrade and there is an unforeseen problem that requires
you to re-install a previous version of the software, you can restore the version of
the software that was in use before the last upgrade.
ƽ
Caution Do not turn off the mojo3D while the software restore is under way.
Restoring previous
software version,
step-by-step To restore a previous software version, carry out the following steps:
1. On the main navigation screen, tap the service button.
2. On the flyout menu, tap the software restore button.
3. Tap on the item to restore. mojo3D or mojoXact (if connected).
Tap to continue.