Leica Geosystems Leica mojo3D - User Manual - Manual (Page 345)

Leica mojo3D, mojo3D Enhancements 345
37. On the Vehicle setup screen, tap the vehicle type in the list at the left of the
screen. Tap and to reveal more options.
38. Enter the measurements required for the vehicle type that you have selected.
• Tap on a field. The on-screen keyboard appears.
• Use the on-screen keyboard to enter the measurement, tap to continue.
• Repeat for the other measurements required.
39. After you have entered all required vehicle measurements, add any required
implements on the same screen. If no implements are required, tap to
continue.
To add an implement carry out the following steps:
42. Enter the measurements required for the implement type that you have selected.
• Tap on a field. The on-screen keyboard appears.
40. On the vehicle setup screen, tap .
An implement button appears in the bar at the top of the screen
and the list of implement types are shown.
41. Tap the implement type in the list at the left of the screen. Tap and
to reveal more options.