Leica Geosystems Leica mojo3D - User Manual - Manual (Page 220)

220 Leica mojo3D, Correction Sources
14. Tap to complete the Network RTK configuration and begin using the system.
You are returned to the main navigation screen.
When the mojo3D is using Network RTK, a network status icon similar to
displays on the Status button of the main navigation screen.
12. On the Enable GL1DE
TM
Fallback screen the operator can choose to have the
system use the GL1DE
TM
correction source in the event that the Network RTK
correction source fails, by tapping the Enable GL1DE
TM
Fallback box so it turns
green.
• GL1DE
TM
Fallback Time Limit is the time in minutes that the system will use the
GL1DE
TM
correction source. If the Network RTK correction source has not come
back online in this time period, then auto-steer is disabled.
• Drift Limit - if the Network RTK correction source comes back online and the
drift from the wayline is less than this value (in meters) then auto-steer
remains enabled. However, if the drift from the wayline is greater than this
value, then auto-steer is disabled.
13. Select or deselect Enable GL1DE
TM
Fallback.