Resetting the printer, Displaying the amount of memory available – Panasonic KX-E4500 User Manual
Page 199
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Resetting the Printer
+
T
NCSIT
It may be necessary to reset the printer if the system is not printing
properly. When the printer is reset, the screen will temporarily go
blank, the daisywheel will spin, and the printhead will move to the
left end of the platen before returning to the left margin. No
memory will be lost and all default settings will remain. It is as if
you shut the typewriter off and turned it back on.
If you reset the printer while in memory, you will automatically
exit text memory and return to the typewriter mode. The docu
ment will not be effected and it will remain in the memory, even
if you were creating a document and did not close it.
1
Press
CODE + T
TTie screen will prompt:
RESET PRINTER ?
Are You Sure ?
No
N/B
2
Press
Y
(for Yes)
Press
N
(for No)
or
Displaying the Amount of Memory Available
+
Q
The KX-E4500 enables you to display the number of characters
available in the memory.
• Press
CODE + Q
Your screen will prompt:
MEMORY LEFT
{# Ch. available)
This prompt will dear upon activating any other command.
189