Panasonic KX-E4500 - Manual (Page 39)

Adjustable Hot Zone
The Hot Zone represents the number of spaces between the bell
and the right margin. It is preprogrammed for 0.7 of an inch
(7 spaces in 10 pitch) from the right margin. You may change the
setting to within one inch of the right margin.
SPACE bar ! /
Setting the Hot Zone
1
Position the MODE selector on NORM
2
Press SPACE BAR or TAB to position the printer at the right
margin
BAC^
space
+
3
BACKSPACE to the required new bell position
(maximum 10 spaces from the right margin)
4
Press CODE + R.MGN
Margin and Tab Exercise
For the first exercise, set your typewriter as indicated below;
The paper guide is at 0
The pitch selector is set at 10 (PICA)
The daisywheel in the unit is 10 pitch
The MODE selector is on NORM
CODE -|-
o
TAB cut
1
Press RETURN
2
Press CODE + TAB CLR
Set the margins and tabs below:
Left margin 15
Tabs 30, 45, 60
Right margin 74
4
Press RETURN
Your Counter will show the number of characters available
on the writing line.
29