Panasonic KX-E4500 - Manual (Page 45)

Typing on Display in the Typewriter Mode
In typewriter mode, only one line of text is displayed when typing
with the mode selector set on DISP or JSTFY. As you type, your
text will appear on the third line of the screen. The cursor will
indicate exactly where the next character you type will appear.
When typing out of memory, only the insert typing mode is avail­
able. Therefore, if you backspace and type in the middle of text,
the characters will insert to the left of the cursor and move the
existing text to the right. The
RELOC key can be used to position
the cursor at the end of the line. Below is a list of keys used to
move the cursor when typing on display in the typewriter mode.
FWD-* Advances the cursor to the right
BACKSPACE Moves the cursor to the left
RELOC
EXPR
Advances the cursor to the end of the line
Moves the cursor to the beginning of the line
The KX-E4500 will automatically return and print the line dis­
played when typing in DISP and JSTFY modes. The automatic
return is triggered when a character is typed following a space in
the hot zone. (The hot zone is the area between the bell and the
right margin.)
The line displayed will also print when one of the following keys
is pressed: RETURN, TAB, DEC TAB, CENTER, PRINT, -lIND,
CODE + E, CODE + F, CODE + K, or CODE -f P.
35