Panasonic SC-DK10 - Manual (Page 16)

k
w>
c
.0
A
2
I
u
Discs
Information about discs that appears on the
unit display
When there are 16 or more tracks on the disc (CD and Video CD
without PBC).
“DVD”
When a DVD is in the play position tray.
“VCD”
When a Video CD is in the play position tray.
“NO DISC"
When there is no disc on the selected tray or the disc is set
incorrectly.
“NO PLAY”
When the disc does not correspond to the unit and cannot be played.
“96kHz 24bit”
When the disc is one with high quality sound recorded with a sam­
pling frequency of 96 kHz and 24 bits.
Disc selection
Choose discs with these marks:
V I D E O
(
o
]
d
§®
[DIGITAL VIDEOl
OtGITAL AUDIO
Do not;
• use irregularly shaped discs (®).
•attach extra labels and stickers.
• use discs with labels and stickers that are coming off or with adhe­
sive exuding from under labels and stickers (®).
•attach scratch-proof covers or any other kind of accessory.
•write anything on the disc.
•clean discs with liquids. (Wipe with a soft, dry cloth.)
•use discs printed with label printers available on the market.
To prevent damage
HQT5824
Always observe the following points.
•Load only 1 disc per tray (©),
• Load discs as shown in figure (3).
An adaptor is not needed with 8 cm discs (singles).
•Set the system on a flat, level surface.
•Always unload all discs before moving the unit.
Do not;
•set the unit on top of magazines, inclined surfaces, etc.
• move the unit while a tray is opening/ctosing, or when loaded.
• put anything except discs in trays.
• use cleaning discs or discs which are badly warped or cracked.