Panasonic SC-DK10 - Manual (Page 32)

Changing sound field and quality
Achieve subtle sound quality settings with the soft, sharp, heavy, and
light coordinates, and add surround effects with the three-
dimensional settings.
Turning Al EQ on
□
Main unit: Press [SUPER 3D Al].
Remote control: Press [SHIFT] + [3D Al].
The current At EQ mode is displayed.
Press again to select another 3D level.
Each time you press the button:
Al EQ^3D Al 1^3D Al 2
t________________ I
3D Al 1: Adds a surround effect to the Al EQ.
3D Al 2: Adds a stronger surround effect to the Al EQ.
Adjusting the sound quality
Remote controi only
1
Turn on Al EQ and select the level.
2
(Within 10 seconds)
Change the sound quality with the
cursor buttons.
Adjust softness and sharpness with [◄] or [►].
Adjust heaviness and lightness with [A] or [Tj.
The original display is restored on the display panel in about
10 seconds.
The level and changes you make are stored and recalled the next
time you turn the AI EQ on as described above, or select it with
[SOUND EQ] page 31).
To cancel
Press [SOUND EQ] to select “FLAT.
•“3D Al r and “3D Al 2” cannot be selected when you are playing a
DVD (except for MIX 2CH mode, ^ page 34) or listening to the
radio.
•“3D Al 1" and “3D Al 2” cannot be selected while a surround system
page 33).
B Usinq the super sodndiequahzer
Turning on the super sound equalizer gives you a more powerful
sound.
Press [SUPER SOUND EQ].
The indicator lights.
To cancel
Press [SUPER SOUND EQ] so the indicator turns off.