Panasonic SC-DK10 - Manual (Page 51)

Changes to the initial settings remain intact after the unit is turned off.
Do the setting procedures again to restore to the original settings.
Remarks
'Other + Input a code number with the numbered buttons
page 54).
‘Original”: The original language of each disc will be selected.
‘‘Automatic": If the language selected for “Audio” is not available,
subtitles of that language will automatically appear if
available on that disc.
Some discs are designed to start in a certain language
despite any changes you make here.
2
0)
£
о
тз
с
io
E
Level 8: All DVDs can be played.
Level 1 to 7; Prohibits play of DVDs with corresponding ratings recorded on
them.
Level 0: Prohibits play of all DVDs.
•The password screen is shown if you choose levels 0 to 7
page 54).
•Select “Level 0” to prevent play of discs that do not have
ratings levels recorded on them.
The password screen is shown when you select “Ratings” if
levels 0 to 7 have been selected page 54).
Field: Less blurred field stills are shown. Select if jittering occurs when
“Automatic" is selected.
Frame: Sharper frame stills are shown. Select if small text or fine patterns
cannot be seen clearly when “Automatic” is selected.
PAL 60: When connected to a PAL television.
NTSC:
When connected to an NTSC or a multi-system television.
When the center/surround speakers cannot be located in the ideal position. * •
Turn dynamic range compression on in the following cases.
• For clear dialogue when listening at low volume.
•When sound is distorted while playing multi-channel DVD
audio through two channels (when headphones or a
microphone are connected, during recording, or when
using the MIX 2CH mode).
RQT5824