Panasonic CT-35G31 - Manual (Page 14)

Control Operation
Helpful Hintsi
Press the TV Mode Selection button to operate TV
Remote functions, if necessary.
Power Button - Press the POWER button after
selecting a mode to turn ON. Press again to turn OFF.
Volume Button
- Press the VOLUME (VOL)
LEFT or RIGHT button for desired listening level (when
On-Screen menus are not displayed).
Channel Buttons (UP/ down )
Press the CHANNEL (CH) UP/DOWN button to sequen­
tially scan through programmed channels (when On-
Screen menus are not displayed).
NOTE: Press the TV Mode button to operate TV
Remote functions, if necessary.
Located On Remote Control
Selects Next
Lower Channel
Selects Next
HigherChannel
Located On Remote Control
A
Increases
Volume Level
Mute Button
— Press the MUTE button to quickly
reduce sound level. “MUTE” will appear on screen
momentarily. Press again to restore sound.
Numeric Keypad (O through 9 Buttons)
These buttons let you directly access any channel.
(Example: press 5 for channel 5; press 1, then 3 for
channel 13). For channels over 99, press three number
buttons.
^ (D
(¿1
VCR Function Buttons
- Th© VCR function
buttons have been designed to operate numerous brands
of VCR
s . The infrared code must be programmed prior to
use. (Please refer to Programming the Universal
Remote for programming instructions.)
Note: Press the VCR Mode Selection button to operate
VCR Remote functions.
Helpful Hints:
Helpful information will display On Screen momen­
tarily when Receiver is first turned on and when the
channel is changed.
Note: if “SPEAKER OFF” is displayed On Screen
after pressing the VOLUME button, refer to
Audio Menu to turn Speakers “ON”.
r
REW
MOVE
PLAY
SIZE
FF
PIP
r^s>
Dcr STOP PAUSE
Search SMAP
E
TV/VCR VCR/DSS CH
FREEZE PIP CHANNEL
O <S> CD
'----------------------------- 1
- 1 4 -