Channel caption, Channel caption (station identifier) – Panasonic CT-35G31 User Manual
Page 24
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Channel Caption
Located On Remote Control
Selects or Adjusts
Features when
Menu is Displayed
Displays and Exits Menus
4.
5.
Press the VOL LEFT/RIGHT button, or use the
Remote Control Keypad, to enter channel number
you wish to assign a Station Identifier.
Press the CH DOWN button to select “ENTER
CAPTION”.
111
Channel Caption
(Station Identifier)
This feature allows you to enter the call names of up to
30 stations into memory (using up to four (4) characters
for each station). The call name will then display along
with the channel number when changing channels or
pressing RECALL.
.Channel Caption
{Station Identifier)
7.
8
.
ENTER CHANNEL NUMBER
ENTER CAPTION
A TO MOVE
I T CURSOR
4 ► TO SELECT
CHARACTER
1. Press the ACTION button to display the Main Menu.
2. Press the CH UP/DOWN and VOL LEFT/RIGHT
buttons to select the Channel Caption Icon.
3. Press the ACTION button to display the Channel
Caption Menu.
6. Press the VOL LEFT/RIGHT button to select first
character in Station Identifier. Then press the CH
DOWN button to move cursor to the second position
and repeat until the complete Station Identifier is
entered (up to four (4) characters).
Press the CH UP/DOWN button to select "ENTER
CHANNEL NUMBER”. Then repeat steps 4 through
6 to continue adding Channel Station Identifier(s).
_ Press ACTION button twice to exit menus.
NÖTE: to delete a Channel
identifier)
t from: menrfory alt four character positions must
_ display dash mark {-).
When the Maximum amount of station identifiers are
entered, “FULL” will be displayed in the characters
position.
- 2 4 -