Panasonic CT-35G31 - Manual (Page 27)

Set-Up Features (cont.)
Located On Remote Control
Selects Desired
Feature when ‘
Menu is Displayed
Selects or Adjusts
Features when
Menu is Displayed
Displays and Exits Menus
Manual Program
This feature allows you to select which channels are
placed into Channel Scan Memory.
1. Press the ACTION button to display thè Main Menu.
2. Press the CH UP/DOWN and VOL LEFT/RIGHT
buttons to highlight the Set-Up Icon.
3. Press the ACTION button to display the Set-Up
Menu.
Auto Program
This feature allows you to place all channels with a video
signal into Channel Scan Memory.
1. Press the ACTION button to display the Main Menu.
2. Press the CH UP/DOWN and VOL LEFT/RiGHT
buttons to select the Set-Up Icon.
3. Press the ACTION button to display the Set-Up
Menu.
4.
5.
6
.
Press the CH DOWN button to highlight “AUTO
PROG”.
Press the VOL LEFT/RIGHT button to start Auto
Programming. Channels will automatically advance
until all channels have been scanned.
Press ACTION button twice after completion of
Auto Programming to exit the Set-Up Menu.
NOTE: Channel numbers with signal present will turn
blue which indicates stored in Channel Scan
Memory.
4. Press the CH DOWN button to highlight “MANUAL
PROG”.
5. Press the VOL LEFT/RIGHT button to display the
Manual Programming Menu.
6 .
7.
8 .
9.
Use the CH UP/DOWN button or the Remote
Keypad “0 through 9 buttons” to select channels.
Press the VOL RIGHT button to add channel(s) to
memory (Blue). Press the VOL LEFT button to
delete channels from memory (Yellow).
Repeat steps 6 and 7 to continue adding or deleting
channels.
Press ACTION button twice to exit menus.
- 2 7 -