Pip (picture in picture) button - this, Pip (picture in picture) button, Swsp button – Panasonic CT-35G31 User Manual
Page 16: Size button
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
HêlptÛlHIh^^
Press the TV Mode Selection button to operate TV
Remote functions, if necessary.
SwSp Button
— Press the SWAP button (when the
PIP frame is displayed) to interchange what is being
viewed on the Main Picture with that of the PIP frame.
NOTE; Audio will be that of the Main Picture.
PIP (Picture in Picture) Button - This
feature allows the viewer to monitor one channel
program while watching another. The monitored source
(PIP) can be a different channel or a different vidéo
source (such as a VCR) when connected to the input
jacks.
• S-Video connection will also operate the PIP feature.
• When the Main Picture is in Video mode with no
signal, the PIP will not operate properly.
VIDEO 1
PIP CH 2
PIP Operation
1. Press the TV Mode Selection button to operate TV
Remote functions, if necessary.
2
.
Press the PIP button (television must be ON). The
PIP frame will appear at the position it was last
displayed. The Main Picture Video Source and PIP
Video Source will display on screen momentarily.
Audio will be that of Main Picture.
ptp
Size Button
— Press the SIZE button (when the
PIP frame is displayed) to choose either the large or
small PIP frame.
SIZE
Large PIP Frame
Small PIP Frame
Main Picture
Channel
Picture in
Picture
Channel
Picture in
Picture
Frame
3. Press the PIP button again to cancel PICTURE IN
PICTURE feature (if desired).
PIP
Note: For PIP Video source connection, refer to the i
Standard
Antenna
and
External
Video)
Connections section.
)
- 1 6 -