Panasonic CT-35G31 - Manual (Page 35)

Care and Cleaning
Picture Tube (Turn set off)
Use a mild soap solution or window cleaner and a clean cloth. DO NOT USE ABRASIVE CLEANERS. Avoid
excessive moisture and always wipe dry.
Plastic Cabinets
Wipe the cabinet with a soft cloth dampened with water or a mild detergent solution and wipe dry with a soft
clean cloth. Avoid excessive moisture. Do not use benzene, thinners, or other petroleum based cleaners.
Wood Cabinets
When dusting or polishing the cabinet, use a clean soft cloth and stroke straight with the grain. An occasional
coat of furniture polish will help preserve the finish. Do not use benzene, thinners, or other petroleum based
cleaners. Do not place objects made of plastic or rubber directly on top of the cabinet. A chemical reaction
could result causing permanent marring of the finish.
Remote Control Transmitter
Do not use benzene, thinners, or other petroleum based cleaners to clean the Remote Control Transmitter. To
clean, wipe with a soft cloth slightly moistened with a mild detergent and then wipe dry with a soft clean cloth.
PoWdr'LosS'
Prolonged power interruption causes the following features to reset to their factory preset state.
FEATURE FACTORY PRESET STATE FEATURE FACTORY PRESET STATE
POWER OFF CLOCK NOT SET
VOLUME APPROX.-1/3 SLEEPTIMER NO/OFF
CHANNEL CH 03 TIMER NO/OFF
PROGRAM MEMORY UNPROGRAMMED ANTENNA MODE CABLE
VIDEO MENUS NORMALIZED TVA/IDEO TV
STEREO/SAP/MONO STEREO BILINGUAL MENU ENGLISH
mi
- 3 5 -