Optional equipment connection and operation, To audio amp connection (stereo), Audioa/ideo connection – Panasonic CT-35G31 User Manual
Page 9: Operation, Notes
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Optional Equipment Connection and Operation
To Audio AMP Connection
(Stereo)
Connect to an external audio amp auxiliary input for.monitohng sound through a stereo system.
TERMINALS ON BACK OF RECEIVER
‘TO AUDIO AMP" terminals
cannot be used directly with
external speakers.
Adjustment - When an audio amp is connected to ‘TO AUDIO AMP" terminals:
1. Select INT. SPEAKERS “ON” Mode. {Refer to the Audio Menu TV Speakers section.)
Set volume of audio amp to near minimum.
Adjust volume of TV to desired listening level.
Adjust volume of audio amp to match the level of TV.
Select INT.TV SPEAKERS ‘OFF&VAO’’ (Variable Audio Output) Mode. {Refer to the Audio Menu TV Speakers
section.)
6. Audio bass, treble, balance, volume, and mute can now be controlled by the TV Remote Control.
NOTE:
When Selecting INT. TV SPEAKERS “OFF&FAO" {Fix Audio Output) Mode, the TV sound output is always at a
constant level and cannot be changed from the TV {Refer to the Audio Menu TV Speakers section).
AudioA/ideo Connection
TERMINALS ON BACK OF RECEIVER
S-Video connection is optional
and overrides the standard Video
connection when connected.
OR
I
OPTIONAL EQUIPMENT
TERMINALS ON BACK
OF EQUIPMEtfT
Operation
1. Connect optional equipment as shown to INPUT 1 or 2 terminals. If S-Video is to be used, connect S-Video (YC)
connector to S-Video terminal of INPUT 1 instead of connecting the standard video cable.
2. Select the desired Video mode by pressing the TVA/IDEO button.
3. Operate optional equipment (VCR-VDP) as instructed in Optional Equipment manual.
NOTES:
• You must select the same VIDEO Mode that the equipment is connected to.
• Connection of optional S-VIDEO jack automatically disconnects the Normal Video Input 1 jack.
- 9 -