Panasonic CT-35G31 - Manual (Page 30)

Programming the Remote Control Using Access Codes
The remote control can be preset for other manufacturers, by utilizing the MODE SELECTION BUTTONS for
CABLE, DSS, VCR, RCVR (a Receiver or Amplifier), CD, LD, and AUX (for Cassette Players or a DVD.)
Code From Index Sheet
Procedure
-
Code Known
Procedure for setting up the remote using the
numerical buttons.
□ Determine brand of device.
□ Identify code(s) associated with the brand in the
infrared code index (located in this manual on
pages 31 thru 34). Record all possible codes.
□ Confirm the device is plugged in and operating
properly.
—
_____
Press and hold the button, then the
button sojhat bpth^are pressed at the same
time forjat least 5 seconds.-
Press the desired Mode button.
Enter the 3-digit code, by using the Remote
Control Keyboard “0 through 9 buttons”.
Now yourremote is set for this code.
f?1 Press to test your device.
NOTE: Some brands have multiple codes. Repeat
the procedure using each listed code until
the device responds correctly.
If you enter an unlisted code, or if you do not
complete your entry within 30 seconds, the settings
will not change.
□
Infrared Remote Codes for Specific Components
1 Helpful Hint: Write down the code numbers for your components in the space provided below. This
1 will serve as a handy reference whenever you need to reprogram your remote control.
CABLE
Cable TV Converter Box |
~]
VCR 1
Video Cassette Recorder |
□
CD
Compact Disc Player
DSS
Digital Satellite System
L
RCVR
Receiver or Amplifier
□
LD
Laser Disc Player
________ □L
other Component Other Component Other Component L □ n
1
Other Component II Other Componani II Other Component |
- 3 0 -