Panasonic CT-35G31 - Manual (Page 21)

Audio Adjustment
(cont.)
Located On Remote Control
Selects or Adjusts
Features when 11* ction |
Menu is Displayed
Displays and Exits Menus
(Audio) Mode Stereo/SAP/Mono
When Audio is broadcast in Stereo or SAP, an ON
Screen display will appear on initial “Turn On” and
"Channel Change”. The available choices will be
indicated in red.
1. Press the ACTION button to display the Main Menu.
2. Press the CH UP/DOWN and VOL LEFT/RIGHT
buttons to select the Audio Icon.
3. Press the ACTION button to display the Audio
Adjustment Menu.
Al Sound — This feature regulates the volume
between programs and commercial audio to maintain a
constant sound output level.
1 .
2 .
3.
Press the ACTION button to display the Main Menu.
Press the CH UP/DOWN and VOL LEFT/RIGHT
buttons to select the Audio Icon.
Press the ACTION button to display the Audio
Adjustment Menu.
P i . . .
AUDIO NORM NO
BASS 31 ilMIlllinilill —
TREBLE MlllllimKIU —--—
■ BALANCE' ■ ■ ■
MODE iigrWEdi SAP MONO
Al SOUND OFF f!:: SURROUNOT^^ON
TV SPEAKERS ON - --
4. Press the CH UP/DOWN button to highlight Al
SOUND.
5. Press the VOL LEFT/RIGHT button to select Al
SOUND ON or OFF.
6. Press ACTION button twice to exit menus.
e-Si
iAUDIQ
^ I 1 ^ -.M
....
^ dio ' norm ' no '-
8ASS4 ;: V 31 iMMlMninnt -—-—
ITREBLE
^ balance
MODE
miimiiinm
SAP MONO
4. Press the CH UP/DOWN button to select MODE.
5. Press the VOL LEFT/RIGHT button to select Stereo,
SAP {Second Audio Programming) or Mono.
6. Press ACTION button twice to exit menus.
Surround
— Use the Surround Feature to enhance
audio response when listening to Stereo broadcasts.
1. Press the ACTION button to display the Main Menu.
2. Press the CH UP/DOWN and VOL LEFT/RIGHT
buttons to select the Audio Icon.
3. Press the ACTION button to display the Audio
Adjustment Menu.
te»:,:;...........3!
M AUDIO NORM NO , f,.
BASS 3immnumiu - — — - ii-ti
^ TREBLE MUIIMIMNU) --------—: if >
— BALANCE -----------------
Ш IVIODE ISIERECi SAP MONO ^
Щ Al SOUND OFF - SURROUND ON J
H TV SPEAKERS ON
Helpful Hints:
STEREO - Two channel Audio reception.
SAP - Second Audio Programming (typically used
for bilingual audio).
MONO - Use when stereo signal is weak.
4. Press the CH UP/DOWN button to highlight
SURROUND.
5. Press the VOL LEFT/RIGHT button to select
SURROUND ON or OFF.
6. Press ACTION button twice to exit menus.
- 2 1 -