Panasonic WJ-SQ508 - Manual (Page 10)

PROGRAMING OF THE MENU
• Four menus are available after entering the programing
mode. Set up each menu with following procedure.
1. Setting up the titles
• The following menu will be displayed on the
monitor.
2.
CH TITLE
1 MAIN LOBBY - 1
2 PARKING • ■ ■ • 2
3 NORTH BLD ••
4 SOUTH BLD
5 EAST .............. 1
6
-7
EAST .............. 2
{
8
6 titles 12 characters
There are 8 titles that can be set in this menu.
Each title is composed of 12 characters.
The position of the character to be selected is
blinking.
Select the appropriate character using the
Backwards Character Selection Switch (15) and
the Forward Character Selection Switch (16).
After the selection has been done, change the
blinking position using the Right Shift Switch (13)
and the Lett Shift Switch (14).
Repeat above procedures until the setting up of
the title for a certain channel is completed.
To change the channel, press the Shift Switch
(12). The first character of the next channel starts
blinking. The picture on the monitor changes to
the next channel at this time.
Repeat above procedures to complete the setting
up of the titles for all channels.
When finished with the setting up of the titles,
press the Enter Switch (
11 ) to memorize the new
menu and to enter the menu for setting up the title
position.
Setting up the title position
‘ • The following menu is displayed on the monitor.
• The position of the title can be changed in 6 ways
by pressing the Backwards Character Selection
Switch (15) and the Forward Character Selection
Switch (16).
• The position of the title can not be set for each
camera individually. All cameras will have the same
title position.
• ■ When finished with the setting up the title position,
press the Enter Switch ( 11 ) to memorize the
position and to enter the menu for setting up the
alarm/sequence mode.
3. Setting up the menu
• The following picture wilt be displayed on the
monitor.
• There are four items to be set in this menu.
ALM/SEQ TITLE OFF
AUTO SKIP ON
ALM-TIME 5 (MIN)
QS-TIME 400.8 (mS)
J
Note:
When the system is changed, the content of
the menu should be ensured.
- 9 -