Ink film - installing / replacing, For replacement only – Panasonic KX-FPG175 User Manual
Page 11
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Setup (Base Unit)
Ink film - installing / replacing
Install the included ink film or replace the used ink film with a new one
The fellewing ink films are available for replacement
Model No
KX-FA53 Replacement film (1 roll)
Model No.
KX-FA55: Replacement film (2 rolls)
Each roll prints about 150 letter-sized pages See page B for accessory information
1
Open the front cover by pulling up the center
part
Center part
Front cover
Push the back cover open button (green) on
the right side of the unit
OR
Push the back cover open lever (green)
inside of the unit
Back cover
open lever (green)
Back
cover
open
button
(green)
Open the back cover
■ For first lime installation of the supplied ink
film, skip to step 6
Back cover
For replacement only
Pull out the blue gear and remove the used
ink film Remove the used core
(continued)
For fax advantage assistance, call 1-BD0-435-7329
Used
ink film
11