Tel mode, Answering all calls manually) activating tel mode, Receiving a fax using the base unit – Panasonic KX-FPG175 User Manual

Page 46: Receiving a fax using the handset, Friendly reception feature, Receiving faxes tel mode

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

Receiving Faxes

TEL mode

(answering

all

calls

manually)

Activating TEL mode

If the arrow

(T)

is shown on Ihe right of the

display, turn It off by pressing

[AUTO ANSWER]

Display

TEL MODE

□N

Receiving a fax using the

base unit

1

2

When the unit rings, press

(DIGITAL SP-PHONE] or lift the handset

and press [TALK] to answer the call

When

— document reception is required,

— a fax calling tone (slow beep) is heard, or

— no sound IS heard,

press [ FAX/5TART )

CONNECTING

■ The unit will start fax reception

Receiving a fax using the
handset

^ When the handsel rings, press

(TALK]

2

When

— document reception is required,

— a fax

calling tone (slow beep) is heard, or

— no sound IS heard,

press

[FAX RECEIVE] until a single beep

15 heard

■ The unit will start fax reception

Note

■ If you da not answer the call within 1 □ rings,

the unit will temporarily activate the

answering device The greeting message will

then be played and the other party can then

send a fax

■ Up to 30 sheets of printed paper can be held

Remove the printed paper before it exceeds

30 sheets

To slop receiving

Press fsfo^

Friendly reception feature

When you answer a call and hear a fax calling tone

(slow beep), the unit will automatically start fax

reception

■ If this feature is not required, set feature #46 to off

(P 73)

Fax reception in memory

When a printing problem is delected, the unit

will lemporarily store the received document

into memory

While the document is in memory

— the display will show an error message and

Ihe following alternately,

r

Display

FAX IN MEMORY

46

— slow beeps will sound if feature #44 is set to

on (p 72)

■ Follow the instructions on pages 77 and 70 to

solve the problem

■ For memory capacity, see page 32

Advertising