General, I cannot make calls, The unit does not work – Panasonic KX-FPG175 User Manual

Page 79: Operations

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

Operations

When a function does not work, check here

before requesting help

General

I cannot make and receive calls

■ The power cord or telephone line cord is

not connected Check the connections

(P 14)

■ If you used a splitter to connect the unit,

remove the splitter and connect the unit to

the wall jack directly If the unit operates

properly, check the splitter

I cannot make calls.

■ The dialing mode setting is wrong Change

the setting of feature #13 (p 69)

The unit does not work

■ Disconnect the unit from the telephone line

and connect the line to a known working

telephone If the working telephone

operates properly, contact our service

personnel to have the unit repaired If the

working telephone does not operate

properly, contact your telephone company

The unit does not ring.

■ The ringer volume is set to off Adjust it

(P 21)

■ The ring setting of feature #06 is set to

"RINGER OFF" Change to another ring

setting (p GB)

The unit displays the following though the

paper IS inserted

The other party complains they only hear

a fax tone and cannot talk.

CHECH PAPER

The paper is inserted halfway Insert it

correctly (p 13) and press [

SET

] to clear

the message

(continued)

FAX ONLY mode is set Tell the other

party the number is only used for faxes

Change to TAD/FAX mode (p 54), TEL

mode (p 46) or TEL/FAX mode (p 4B)

If you use a distinctive ring service, turn

AUTO ANSWER off so that the fax

machine is in TEL mode

If you use a distinctive ring service, make

sure you have set the same ring pattern

assigned by the telephone company

(P 51)

,

The [REDIAUPAUSEl budon does not

function properly.

■ If this button IS pressed during dialing, a

pause will be inserted If pressed

immediately after a dial tone is obtained,

the last number dialed will be redialed

The receiving mode does not function

properly.

■ A Distinctive Ring pattern of feature #31 is

set (p 51)

■ TEL/FAX made is set (p 4B, 49)

During programming, I cannot enter the
code, ID number or password

■ All or part of the numbers are the same

Change the number feature #11 (p 69),

#41 (p 72), #51 and #52 (p 73)

The ink film runs out quickly.

■ The HELP printing function, copy function,

and reports also use ink film

(continued)

For fax advantage assistance, call 1-B00-435-7329

79

Advertising