Panasonic KX-FPG175 - Manual (Page 43)

Sending the same document to pre-programmed'parties
1 Insert the document FACE DOWN
■ If necessary, press [+D or CED repeatedly
to select the desired resolution (p 3B)
^ Press
___________________________________________________
Sending Faxes
Display
DIRECTORY [+ -]
<MAILBOX>^
2 Press [+D or (3 until the following is
displayed
<BROADCAST>
SEND PRESS SET
Press CUT]
■ The document will be fed into the unit and
scanned into memory The unit will then
transmit the data to each item, calling each
number sequentially
■ After transmission, the stored document will
be erased automatically, and the unit will
automatically print a broadcast sending
report
Note:
- If you select the “FINE", "SUPER FINE" or
“PHOTO" resolution, the number of pages
that the unit can transrnit will decrease
■ If the document exceeds the memory
capacity (p 92), sending will be canceled
■ If one of the items is busy or does not
answer, it will be skipped All skipped items
will be redialed up to 2 times after all of the
other Items have been called
To send to selected parties only once
You can also select the parties for each transmission
1. Follow steps 1 and 2 above
2. Press or (3 until the following is displayed
Display
<ONE TIME BROAD>
PRESS SET
3. Press [ SET ] to start programming the items you
want to transmit
DIR= ' [00]
NAVI [+ -] & SET
4. Press or C3 until the desired item you want to
transmit IS displayed
5. Press [SETI
Example
Example
Bill
6543210
DIR=Blll [01]
SEND PRESS SET
■ To program other items, repeat steps 4 and 5
(up to 20 Items)
B Press [ SET] to start transmission to the
programmed items
To cancel the broadcast setting
1 Press ( stop ] while the unit displays the
following
Display J brdad ^ sting "
The display will show the following
SEND CANCELED’
YES SET/NO STOP
2. Press [SET]
43