Panasonic KX-FPG175 - Manual (Page 82)

Operations
Fax - receiving (cent.)
The display shows the following, but faxes
are not received.
CONNECTING
■ The incoming call is not a fax Change the
receiving mode to TEL mode (p 46) or
TAD/FAX mode (p 54)
A blank sheet is ejected.
■ If a blank sheet is ejected after the
received document is printed out, the
receiving reduction rate is not
programmed correctly Program the proper
rate in feature #36 (p 71)
■ The other party placed the document in
their fax machine the wrong way Check
with the other party
A white line or a dirty pattern appears on
your recording paper.
■ The glass or rollers are dirty Clean them
(P B6)
The printing quality is poor.
■ The other party sent a faint document Ask
them to send a clearer copy of the
document
■ The thermal head is dirty Clean it (p H7)
■ Some paper has instructions
recommending which side to print on Try
turning the paper over
■ You may have used paper with a cotton
and/or fiber content that is over 20%, such
as letterhead or resume paper
We recommend smooth paper such as
Hammermill Jet Print for clearer printing
I cannot receive documents by pressing
[FAX RECEIVE) on the handset
■ Press [FAX RECEIVE] until a single beep
IS heard
■ The memory is full of received documents
due to a lack of recording paper or a
recording paper jam Install paper or clear
the jammed paper
The other party complains that they
cannot send a document.
■ The memory is full of received documents
due to a lack of recording paper or a
recording paper jam Install paper (p 13)
□r clear the jammed paper (p B4)
Receiving mode
I cannot select the desired receiving
mode.
■ If you want to set TAD/FAX, FAX ONLY or
TEL/FAX mode
— select the desired mode using feature
#77 (p 75), and
— press [^TO ANSWER] to turn ON
the arrow (T) located on the right of
the display
Display
ON
If you want to set TEL mode
— press [^TO ANSWER] to turn OFF
the arrow (▼) located on the right of
the display
ON
The other party complains that they
cannot send a document.
■ The unit IS not in AUTO ANSWER mode
Press [AUTO ANSWER] to turn ON the
arrow (T) located on the right of the
display
Copying
The unit does nol make a copy.
■ You cannot make a copy during
programming Make the copy after
programming or stop programming
A black line, a white line or a dirty pattern
appears on the copied document
■ The glass or rollers are dirty Clean them
(P B6)
The copied image is distorted.
■ The thermal head is dirty Clean it (p B7)
(continued)
82 For fax advantage assistance, call 1-800-435-7329