How to operate, A. manual single stage heating – Panasonic NE-1757 User Manual

Page 8

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

How to Operate

This oven is preset at the factory for the foilowing:

For model
NE-1757

For models NE-1757/NE-1257

1. 208 Volts Power Source

1. Manual operation

2. Number Pads pre set to high power at the indicated heating times for single

stage heating

1 = 10 sec.

6=1 min.

2=20 sec.

7= 1 min. 15 sec.

3=30 sec.

8=1 min. 30 sec.

4=40 sec.

9=1 min. 45 sec.

5=50 sec.

0=2 min.

3. Program unlock
4. Cycle counter set to “0” on all pads.

If you desire any other feature please consult the owners manual to find how to activate the feature.

A. Manual Single Stage Heating

1, Make sure the oven is plugged into a properly grounded electrical outlet.

f

---------

/ /

u

\__________

~f n n

L

/_//_/

/ c

n

/ _/ _/

---------------------

/ L

1_________ ___________ L-7

m m

L uu

2. Open the door. The cavity light will come on. The cooling fan will start if the oven has

been operating. "0" will appear in the display window.

3. Put the food into a suitable container, place it in the center of the oven and then close

the door securely.

4. Select the desired power level by touching the Power Level Selector Pad. The Selected

Power Level will be displayed in the display window and the single stage heating

indicator, “1 ” will start to blink.

[Example]; Touch the Power Level Selector Pad 1 time for HIGH Power, 2 times for
Medium and 3 times for Defrost.

5. Set the desired heating time by touching appropriate number pads in the combination of

minutes and/or seconds desired, (up to 15 min. on HI or MED—or 30 min. on DEF).

[Example]: Touch 2,0 and 0 for 2 minutes.

Note: When you set over the limited time and press START pad, the indicator the

single stage heating indicator “1 ” and the time will blink. Please cancel by

STOP/RESET pad and set correctly again.

6. Touch the start Pad:

A. The cavity light will come on.
B. Heating will start.

C. The Power Level and the single heating indicators stage “1 ’’ will start to blink.

D. The time on digital display will count down.

7. When all time expires, the end of cycle Beep Tone will sound and all heating will stop.

The cavity light will go off. The fan will continue to run until the oven has cooled off. The

display will blink “0” until the door is opened.

8. Open the door and take the food out. The digital display will return to the originally

selected time and power. The oven light will go on. The cooling fan will start if the oven
has been operating.

9. Close the door. One minute later, the fan will stop and the digital display will go blank.

-

8

-

Advertising
This manual is related to the following products: