B. manual 2 stage heating – Panasonic NE-1757 User Manual

Page 9

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

SPECIAL NOTE: For both single and 2 stage heating.

1. While heating, one touch on the STOP/RESET pad stops the oven. You can restart it by

touching the start pad or a second touch on the STOP/RESET pad will cancel the

selected program.

2. While NOT in a heating cycle one tap on the STOP/RESET pad cancels the selected

program.

REPEAT FEATURE

1. You can repeat exactly the same manually selected heating time by touching only the

Start Pad, if you use the oven again within 1 minute (within 30 minutes when the door
has been left open).

2. After 1 minute of non-use with door closed (30 minutes with the door open), the repeat

feature will be cancelled.

B. Manual 2 Stage Heating

-.

2

,-

3.

5.

6

.

7.

Follow Steps 1 to 5 on page 8.
Select the desired power level for second stage heating by touching power level
selector pad and appropriate number of times. The power level will be displayed in the

Display Window and the second stage indicator “2" will start to blink.

[Example]: Touch the Power Level Selector 3 times for Defrost.

Set the desired heating time for the second stage by touching the appropriate number

pads.

[Example]: fori minute touch pads 1,0 and 0.

Touch the Start Pad:

A. The total time for both stages will be displayed.

B. The cavity light will come on.

C. The single stage indicator “1” will start to blink while the second stage indicator “2"

will stay on. The power level indicator for the first Stage wiil start to blink.

D. The time on digital display wili count down.
After the first stage heating time expires, a single beep tone will sound, the power level

indicator for the second stage wili start to blink and the time on digital display will

continue to count down.

When all time expires, the end of cycie Beep Tone wiil sound. All heating will stop. The
cavity light and fan will go off. The time display will blink “0” until the door is opened.

Open the door and take the food out. The digital display will return to the originally
selected time and power. The oven light will come on and the cooling fan will start.

8. Close the door. Cavity light will go off and the fan will continue to run until the oven has

cooled off. One minute later, the fan will stop and the digital display will go blank.

See Special Note of “Manual Single Stage Heating."— Above.

-

9

-

Advertising
This manual is related to the following products: