Panasonic NAMPS HH950 - Manual (Page 10)

Memory (cont.)
• Word List; contains a listing of
predefined, commonly-used words to
simplify creating/editing Group Labels
and Name Tags.
• Last number memory and redial; ten
most recently-called numbers are
automatically stored in memory with a
time/date stamp
• Auto Retry; phone redials the same
number automatically every ten
seconds {up to 15 times) after the re­
order tone, i.e., the system is busy
• Auto-Power On: powers the phone ON
automatically at a pre-selected time.
• Auto-Power Off: powers the phone OFF
automatically at a pre-selected time.
• DTMF Signaling from Memory; provides
access to data systems
Display/Indication:
• Signal Strength Indicator; shows the
• Received Call indicator; shows the
strength of the received system
number of calls (up to 99) you’ve
service.
received but not answered along with a
• 16-character/4-line alphanumeric
time/date stamp of the 10 most recent
Liquid Crystal Display (LCD)
calls
• Own number recall display
• Silent Alert; ringing tone is muted while
• Visual and audible low battery warning
display shows ringing message
indicator
• Overflow character display
• Audible pace beep every minute to help
track length of calls
• Programmable Wake-up Display
Message
Selectable:
• Ringing: select volume, tone, and
• Resettable total call length timer
escalating volume/tone
• Non-resettable total call length timer
• Four-level electronic lock:
• Separate, non-resettable total timer for
- Full: locks all incoming and outgoing
each of two numbers
calls
• Individual call length timer
- Dial: transmits only stored numbers
* Last Call Timer
- Send: can only receive calls
* Auto Recall: phone reminds user to call
- Receive: can only make calls
a specified # at preselected time
• Dual-selectable telephone number
• Total elapsed timer (for two different
numbers)
Introduction Features 1-3