Panasonic NAMPS HH950 User Manual
Page 35
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
No Service
OaOOAM
Decs
5. In about 1 second, the wake-up display message
disappears and is replaced by the No Service
message, if No Service remains on the display for an
extended period, the handset is outside the service
coverage area. Move to another place where you can
make a call, or if your handset is programmed to
operate on two selectable numbers, check your other
number as a possible alternative.
Signal
08:00 AM
Doc 05
6. When the display indicates one of the following
messages, the phone is ready for use;
• SIGNAL (within home area)
• ROAM N (non-wireline; outside home area)
• ROAM W (wireline: outside home area)
Signal =>“==
Full Lock
01:00 PM
Dec 05
7. Note the ^
indication at the top right of
the display designates the received signal strength
levels from zero (minimum level) to five (maximum
level).
8. If any of the LOCK messages (Dial Lock, Send Lock,
Receive Lock, Theft Lock, Full Lock) appear on the
display, unlock your phone by entering the proper
"unlock" code. (See page 3-57 for Lock details.)
3-2 Powering On
Operation