Cdcz)œ), Security (fcn 3), Lock – Panasonic NAMPS HH950 User Manual
Page 90: Notes, Security (fcn 3) -57, Lock -57, Ddcd, Eido, Cdcz)œ) cdcdcd
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
CDCZ)Œ)
CDCDCD
DDCD
S(^[^
r
fmiO
1 ÎKTOicl r muAt 1
|4o.]|5^ll6->.|
(EIDO
□□□
Signal =.=.==
Full Lock
08:00 AM
Doc 05
Security (FCN 3)
Lock
CAUTION: Be sure to obtein the proper unlock code before
activadng any lock functions!
Keypad Sequence:
Lock feature allows you to electronically "lock" the phone to
limit others from making and receiving unauthorized calls.
Five lock types are provided:
• UNLOCK - No restrictions
• DIAL LOCK - Calls may ^ be dialed directly, but
may be made from phone memory (00 to 99), or by
redialing the last call made from memory.
• SEND LOCK - ^ calls may be made, but calls may
be received
' FULL LOCK - № calls may be made, or received
• RECEIVE LOCK - Calls may be made, but not
received.
If any of these lock features are active, your phone
indicates the selection on the display immediately after you
power ON.
Regardless of the lock setting, (except Theft Lock, see
page 3-61) you may still make emergency calls such as
911 (if available in your area). However, emergency
numbers are normally programmed by your dealer.
Therefore, consult your dealer for emergency number
configurations.
NOTES:
•
To get unlimited access to your phone, "unlock" your phone.
•
The default lock code for your phone is factory set to 0000.
•
To set a lock code, see page Z-Q7.
•
If you enter an incorrect lock code, the phone automatically
exits the lock mode and returns to the normal operating mode.
Operation
Security (FCN 3) 3-57