Panasonic NAMPS HH950 - Manual (Page 99)

How to Set Theft Code
Keypad Sequence:
ÿ
(TON)
' '
LOCK VISUAL
^ ^____ _
0 MHO
; ENTER; ^^
i DIGtT i d5)
: CODE ;
FCN 36-==
Lock Code?
ri
FCN 36=====
Theft Code
4*5*
< 2 - 4 digits >
Theft Codes are usually any two-to-four digit number
combinations of your choice, including the * and #
characters- Select a number which is easy for you to
remember, yet not obvious to someone else.
1. To enter a new Theft Code number, press (M) [ 3 ^]
and enter your lock code. Observe the current
setting appears on the display.
NOTE:
To escape from this mode without changing the theft
code, press C clr ) .
2. Enter the desired two-to-four digit number, including *
and # characters- If you make a mistake while entering
the digits, briefly press CciJ) to backspace over the
incorrect digit. '
FCN 36=====
Theft Code
1234
< digits,STO>
a
FCN 36==.
Theft Code
1234
Set
3 . Press CsTo) to save the code to memory.
4. The phone automatically exits this mode after three
seconds.
3-66 Security (FCN 3) Operation