Panasonic NAMPS HH950 - Manual (Page 72)

RCL76 -=
12345678
1 . rcl I and enter the memory To send DTMF tones, press
location number. Observe the digits appear on the
display.
2. Press and SND keys. The phone automatically
sends the displayed number with DTMF tones.
Signal
0
-
Prefixed Dialing
Keypad Sequence:
To store/recall:
jJCED
j ENTER i ---------- '
iOESIREDl RCL
i DIGITS ;
CD
Prefix Dialing allows storing the prefix of commonly-dialed
numbers (area codes, common system prefixes, local
system access codes, etc.) into the handset for later recall
by merely pressing CT) . Prefixes may be up to 32 digits
long.
1 . To store a prefixed dial, first verify that no digits are
presently entered in the display, and that the handset is
not in a Dial Lock condition (see page 3-57).
2. Press (~p~). Assuming no previous prefix has been
entered, observe the " 0 -" display message.
3. Enter the desired sequence (up to 32 digits) and press
to store this prefix into memory. In this example, RCL
we’ve entered 1 2 3 as the prefix.
Operation Prefixed Dialing 3-39