Panasonic NAMPS HH950 User Manual
Page 92
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
FCN32-------------
Dial Limit
None
< +, - or STO >
FCN 32 =====
Dial Limit
Select
< +, - or STO >
FCN 32 =====
Dial Limit
12 digits
<digits,STO >
FCN 32 ===■
Dial Limit
12 digits
Set
If attempting to make a call which exceeds the restricted
digits, a Dial Limit message appears for three seconds.
1. To set the digit dialing limit, press (reS)
enter your lock code.
and
2. With no dial limit currently set, the message "None"
appears on the display. However, if a Dial Limit is set,
the message "Select’ appears.
3. Press C±D or O to toggle through these two possible
seiections—None or Select.
4. To leave the Dial Limit set to none, press ('sfo^ with
None selected on the display, and exit this mode by
pressing (cE) •
5. With Select, press (M) • Observe the current Dial Limit
appears on the display.
6
. Enter the desired digits between 1 and 31.
7. Press fW) again to store the change to memory.
8
. The phone automatically exits this mode after three
seconds.
Operation
SecuHty (FCN 3) 3-59