Press power on the remote or unit, I using the 100 key, I rapid tune – Panasonic OMNIVISION PV-DM2799 User Manual
Page 14: I phones, To display or remove the overlay, Tv operation 1, Vcr status & clock display, Black screen display
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
TV Operation
1
Press POWER on
the remote or unit.
I Using the 100 key
When selecting CABLE channels 100 to 125 with the
NUMBERED keys, first press the 100 key, and then enter the
remaining two digits.
I Rapid Tune
Press R-TUNE to display the last channel you were watching.
I Audio Mute
Press MUTE to instantly mute the sound.
Press again, to restore the previous sound level.
I Phones
Connect an earphone {not supplied) or headphones (not
supplied) to the Phones Jack.
VCR Status & Clock Display
To display or remove the
overlay.
Press DISPLAY.
Function Status
Channel & Call Letter
Current Time
Rec Time Remaining
(OTR mode only see -
page 17.)
Receivable Broadcast ■
Types (See page 15.)
H IliOCPM
CH(e
m
•0:12:34-
t< STEREO ^
SAP
MONO
SLP-
Counter
Tape Speed
Black Screen Display
Whenever a blank section of a tape comes up in Play mode, or
when the selected channel has no broadcast signal with the
“Weak Signal Display ON/OFF” (page 33) set to “OFF”, the
TV screen will turn solid black.
l^c
D All connections are made (See page 9.)
D Your unit is plugged in.
Check list before you begin.
14
For assistance, call 1-800-211-PANA(7262)