Setting the logo print position – Panasonic KX-F3100 User Manual
Page 168
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Setting the Logo Print Position
Your logo, your telephone number, date, time, and page number will be printed on the
transmitted document from your unit in the following manner:
OUT: Outside of the transmitted document’s paper size (pre-selected setting).
IN:
Inside of the transmitted document’s paper size.
To change the setting, proceed as follows;
1
2
3
4
5
Press MENU until the following is shown.
PROG.[1.DATE 2.TEL
3.SYSTEM 4.REPORT]
Press #, then press 10 to start programming.
LOGO POSITION^OUT
[1.OUT 2.IN]
Press the number of the selection you desire.
Setting selections:
1: OUT (Outside)
2: IN (Inside)
Press SET to store your selection into memory.
PROG.[1.DATE 2.TEL
3.SYSTEM 4.REPORT]
Press STOP/CLEAR to end the operation.
166