Notes, Materials required, Repacking – Panasonic KX-F3100 User Manual
Page 222
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Repacking
To transport or ship your unit, follow the instructions below.
- Disconnect the cords, cassette, and trays.
- Seal the toner cartridge.
- Repack the drum unit.
- Seal the inside of the printer.
- Pack into the original carton.
NOTES:
- Use the original carton and all of the original packing materials.
- Improper repacking of the unit may result in a service charge to repair the unit or in a cleaning
charge to remove spilled toner.
- Because the unit uses dry toner, extreme care must be taken when handling. The unit should
be handled in the upright (vertical) position until the unit is repacked completely.
Materials Required:
- Original carton and packing materials
- Dropcioth or newspaper
- Shipping tape
- Old clothing or clothing you do not mind getting dirty.
Disconnecting the cords, cassette, and trays:
1
Turn the power off, then disconnect the power cord,
telephone line cord, and handset cord.
- To disconnect the telephone line cord and handset
cord, pul! the plug while pressing the tab on it.
220