Important, Selecting the number of fax recognition rings, T] o – Panasonic KX-F3100 User Manual
Page 172: I] o
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Selecting the Number of Fax Recognition Rings
When a manual fax transmission or a voice call is received in the
TEL/FAX
mode, the unit will
emit the distinctive ring three times as a pre-selected setting until it will automatically switch to
fax. {We call this ring “silent fax recognition ring”.)
When an automatic fax transmission is received in the
TEL/FAX
mode, the unit will receive the
fax without ringing.
You can change the number of the fax recognition rings from 3 to 8.
IMPORTANT:
- This feature is effective only in the
TEL/FAX
mode.
- Telephone fees will be charged to the calling party from the first ring because the unit emits
the rings after answering a call.
To change the number of rings, proceed as follows:
Press MENU until the following is shown.
1
2
3
4
5
»RECTOHY
f I
TRANSMfT SETTUIG
1 MAIL BOX
CZ)
T
ALARM--------- 0
POWER-------- O
J
ALITO WAL
t] o
STOP/CLEAR
@
i] o
COPY
□ 1
PROG.[1.DATE 2.TEL
3.SYSTEM 4.REPORT]
Press #, then press 16 to start programming.
SILENT FAX RECO.
RING COUNT=3 [3-8
Enter the desired number of rings from 3 to 8.
Press SET to store your selection into memory.
PROG.[1.DATE 2.TEL
3.SYSTEM 4.REPORT]
Press STOP/CLEAR to end the operation.
170