Panasonic KX-F3100 User Manual

Page 226

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising

Pack the drum unit into the protective bag.

Sealing the inside of the printer:

Shippinq cover

Lens \

Developer unit

Protection sheet

Hook the left clip of the shipping cover on the shaft

of the developer unit, and press the clip firmly.

CAUTIONS:

- Do not touch the magnet roller.
- Make sure the protection sheet remains visible

while installing the shipping cover.

- Be sure to install the shipping cover properly to

avoid spilling toner.

Press the right side of the shipping cover firmly, and

insert the tab of the developer unit into the slot until
it clicks into place.

CAUTION:

- Do not touch the lens.

224

Advertising