360 Systems MAXX-6T - Manual (Page 103)

____________________________________________________________________________________
MAXX 6T Owner’s Manual Page 103
Replacing Hard Drives
Maxx 6T Hard Drives are hot-swappable, meaning they can be replaced “on-the-fly” without loss of
data or interruption of server operation.
To replace a drive:
A. Loosen the knurled screws fastening the front panel. Pull forward and down to expose the
drive.
B. Remove the drive by pulling on the blue lever to unlatch the drive. Refer to Figure 45.
Remove the drive from the tray and replace it with the replacement drive.
C. With the blue latch still extended, gently slide the tray into the bay until you feel it “seat”.
Press on the latch to lock the drive into place. Return the panel to its normal position.
Figure 45 - Front Panel Deployed – Disk Unlatched